MODE-RTTY GROUP
090 RTTY LCUT FREQ
Function: Selects the cutoff frequency of the lower side of the RX audio filter in the RTTY mode.
Available Values: OFF, 100 ~ 1000 Hz (50 Hz/step)
Default Setting: 300 Hz
091 RTTY LCUT SLOPE
Function: Selects the filter slope of the lower side of the RX audio filter in the RTTY mode.
Available Values: 6dB/oct or 18dB/oct
Default Setting: 18dB/oct
092 RTTY HCUT FREQ
Function: Selects the cutoff frequency of the upper side of the RX audio filter in the RTTY mode.
Available Values: OFF, 700 ~ 4000 Hz (50 Hz/step)
Default Setting: 3000 Hz
093 RTTY HCUT SLOPE
Function: Selects the filter slope of the upper side of the RX audio filter in the RTTY mode.
Available Values: 6dB/oct or 18dB/oct
Default Setting: 18dB/oct
094 POLARITY-R
Function: Selects normal or reverse Mark/Space polarity for RTTY receive operation.
Available Values: NOR or REV
Default Setting: NOR
095 POLARITY-T
Function: Selects normal or reverse Mark/Space polarity for RTTY transmit operation.
Available Values: NOR or REV
Default Setting: NOR
096 RTTY OUT LEVEL
Function: Sets the RTTY (AFSK) data output level at the output port (pin 5) of the RTTY/PKT jack.
Available Values: 0 ~ 100
Default Setting: 50
097 RTTY SHIFT
Function: Selects the frequency shift for RTTY (AFSK) operation.
Available Values: 170, 200, 425 or 850 Hz
Default Setting: 170 Hz
098 RTTY MARK FREQ
Function: Selects the Mark tone for RTTY operation.
Available Values: 1275 or 2125 Hz
Default Setting: 2125 Hz
End of Menu Item Details
"Mode-RTTY Group"
|
MODE-SSB GROUP
099 SSB LCUT FREQ
Function: Selects the cutoff frequency of the lower side of the RX audio filter in the SSB mode.
Available Values: OFF, 100 ~ 1000 Hz (50 Hz/step)
Default Setting: 200 Hz
100 SSB LCUT SLOPE
Function: Selects the filter slope of the lower side of the RX audio filter in the SSB mode.
Available Values: 6dB/oct or 18dB/oct
Default Setting: 6dB/oct
101 SSB HCUT FREQ
Function: Selects the cutoff frequency of the upper side of the RX audio filter in the SSB mode.
Available Values: OFF, 700 ~ 4000 Hz (50 Hz/step)
Default Setting: 3000 Hz
102 SSB HCUT SLOPE
Function: Selects the filter slope of the upper side of the RX audio filter in the SSB mode.
Available Values: 6dB/oct or 18dB/oct
Default Setting: 18dB/oct
103 SSB MIC SELECT
Function: Selects the microphone to be used on the SSB mode.
Available Values: FRONT or DATA
Default Setting: FRONT
FRONT Selects the microphone connected to the front panal MIC jack while using the SSB mode.
DATA Selects the microphone connected to pin 1 of the PACKET jack while using the SSB mode.
104 SSB TX BPF
Function: Selects the audio passband of the DSP modulator on the SSB mode.
Available Values: 100-3000, 100-2900, 200-2800, 300-2700, 400-2600 or 3000WB
Default Setting: 300 ~ 2700 Hz
105 LSB RX CARRIER
Function: Adjusts the receiver carrier point for the LSB mode.
Available Values: -200 ~ 0 ~ +200 Hz (10 Hz steps)
Default Setting: 0
106 USB RX CARRIER
Function: Adjusts the receiver carrier point for the USB mode.
Available Values: -200 ~ 0 ~ +200 Hz (10 Hz steps)
Default Setting: 0
End of Menu Item Details
"Mode-SSB Group"
|